Back to Blog
Heat Pumps & Aerothermal
August 20, 2026
11 min

Does Aerothermal Work with Existing Radiators in Madrid?

Aerothermal can connect to existing aluminium or cast-iron radiators in Madrid homes, but key technical requirements apply: flow temperature, emission surface and unit sizing. Practical guide.

Does Aerothermal Work with Existing Radiators in Madrid?

The most common question we receive from Madrid homeowners considering aerothermal is: "Do I have to throw out my radiators?" The short answer is: not always. Aerothermal can work with existing radiators, but there are technical requirements that determine whether the installation will be efficient or a waste of money. This guide explains when it works, when it doesn't, and what alternatives you have.

Why Aerothermal and Radiators Can Have Compatibility Issues

Traditional gas boilers heat the water circulating through radiators to 70-80°C. Aerothermal, by design, works with lower flow temperatures: typically between 35°C and 55°C. This means the water reaching the radiator is less hot and therefore the radiator emits less heat per m² of surface. If the radiator doesn't have enough emission surface, the room won't reach comfort temperature.

The key factors are flow temperature and emission surface. An 80x60 cm aluminium radiator designed for 75°C may not heat a 15 m² room if it receives water at 45°C. But a larger radiator, or multiple radiators in the same room, can compensate for that lower temperature.

Radiator Types and Their Compatibility with Aerothermal

Radiator typeCompatibilityNotes
Aluminium (modern)HighGood emission surface. Usually works well at 50-55°C.
Aluminium (old)MediumDepends on size. May need additional units.
Cast ironHighLarge thermal mass and surface. Excellent at low temperature.
Steel panelLowSmall emission surface. Generally insufficient at low temperature.
Tubular / low-profileMediumDepends on model. Some are designed for low temperature.

How to Know If Your Radiators Are Compatible

Before installing aerothermal, a technician must evaluate:

  • Total emission surface: sum of the surface of all radiators in each room. The larger the surface, the lower the temperature needed.
  • Material and age: modern aluminium radiators (post-2000) and cast iron are the best candidates.
  • Nominal power at 70°C: compare the power the radiator emits at 70°C with what's needed at 50°C. If the gap is large, elements must be added or radiators replaced.
  • Heat load calculation: determine how much power each room needs based on insulation, orientation, windows and size.

At AirPro Madrid we perform this calculation during the site visit. Aerothermal with radiators cannot be recommended without a prior technical study of the home.

What If My Radiators Aren't Sufficient?

If the technical study concludes that existing radiators don't emit enough heat at low temperature, you have three options:

  1. Add low-temperature aluminium radiators: complement existing ones with additional larger units. Indicative cost: €200-400 per radiator installed.
  2. Replace steel panel radiators with low-temperature aluminium: cost depends on the number of rooms, typically €1,500-4,000 for a 3-4 bedroom flat in Madrid.
  3. Install fancoils instead of radiators: fancoils allow summer cooling and winter heating. The most versatile option if you're renovating. Indicative cost: €600-1,200 per fancoil installed.

For more context on emission options in flats, see our guide on aerothermal in a flat vs. chalet in Madrid.

Flow Temperature: The Decisive Factor

Aerothermal can be configured to deliver water at different temperatures. The higher the flow temperature, the lower the COP (efficiency) of the unit:

Flow temp.Approx. COPRadiator compatibility
35°C4.5-5.0Underfloor heating only
45°C3.8-4.3Large aluminium / cast iron
50°C3.3-3.8Modern aluminium
55°C2.8-3.3Modern aluminium (marginal)
60°C2.4-2.8All, but low efficiency

COP values are indicative and vary by brand, model and outdoor temperature. At 55-60°C aerothermal is still more efficient than a gas boiler, but savings are significantly reduced. The ideal target is 45-50°C, which requires radiators with sufficient surface.

Real Cases in Madrid

Case 1: Flat in Chamberí with Cast-Iron Radiators

A 110 m² flat in Chamberí with original cast-iron radiators (1960s). The technical study determined the emission surface was sufficient to work at 50°C. An 8 kW aerothermal heat pump was installed. Result: heating and DHW with an estimated 45% saving compared to the previous gas boiler. No radiators needed replacement.

Case 2: Flat in Latina with Steel Panel Radiators

An 85 m² flat in Latina with steel panel radiators (1990s). The technical study concluded the emission surface was insufficient even at 55°C. Five steel radiators were replaced with low-temperature aluminium units. Additional cost: €2,200. Result: efficient system at 50°C with an estimated 40% saving.

Have radiators and want to know if aerothermal is viable?

We perform a complete technical study of your installation: we measure the emission surface, calculate heat loads and tell you whether your radiators work or need replacing. No-obligation site visit.

WhatsApp: Radiator + aerothermal study

Frequently Asked Questions

Can I keep my old radiators?

It depends on material and size. Cast-iron radiators are almost always compatible. Modern aluminium usually works. Steel panel radiators generally don't emit enough heat at low temperature and need replacing.

Does aerothermal with radiators heat as well as a gas boiler?

If the system is properly sized, yes. The water arrives at a lower temperature, but with sufficient radiators the room reaches comfort temperature. It may take a bit longer to heat the room from cold, but consumption is much lower.

Do I need to replace existing pipework?

Not always. If the existing pipework is in good condition and the right diameter, it can be reused. If it's old plastic or blocked, replacement may be necessary. This is assessed during the technical visit.

Can I combine radiators in some rooms and underfloor heating in others?

Yes, it's possible. Aerothermal can feed two circuits at different temperatures via a mixing valve. For example, underfloor heating in the living room at 35°C and radiators in bedrooms at 50°C.

What maintenance does aerothermal with radiators need?

Annual maintenance: cleaning the circuit filter, checking hydraulic circuit pressure, verifying refrigerant and cleaning the outdoor heat exchanger. See our HVAC maintenance service in Madrid.